Common chain code verification device

The chain code verification device is a whole chain formed by many rollers with the same quality connected by iron plates with close spacing. During calibration, install the chain code above the belt and fix both ends on the column.

Product nameCalibration device

Metering accuracy3/1000

Accuracy1/1000

CharacteristicReasonable

Advantage 1Small area

Advantage 2Efficient

Product quotation

0516-85050275

Call the service hotline to learn more

Product features

PRODUCT FEATURES

Chain code verification

The chain code of a certain length acts on the belt to increase the pressure of the belt on the idler, and the friction force also increases, so that the belt tension when the chain code is calibrated is greater than the belt tension when the chain code is unloaded.

Material transportation

In actual material conveying, there are materials on the whole belt. In addition to the effective weighing length, there are load cells, and the symmetrical weight of materials on the length adjacent to the weighing length also has an impact.

Calibration method

In the actual calibration process, the chain code is placed on the belt conveyor, which is the same as that of the material in the actual conveying process.

Convenient handling

A movable chain plate shall be installed at both ends of the chain at a certain distance. The whole chain can be divided into several sections for handling.

Product introduction

FOUR STRUCTURAL COMPONENTS

01
Product introduction
Common chain code verification device

It is a kind of analog compliance standard that can be used as the calibration device of electronic belt scale within the agreed time. With the addition of automatic retracting and releasing winch device, it is more convenient to calibrate and correct the measurement accuracy of electronic belt scale.
02
Product features
Common chain code verification device

The checking and measuring accuracy is high (static 3/1000, dynamic 1/1000). The structure is reasonable and the operation is convenient. Small floor area, safe and reliable.
03
Form
Common chain code verification device

During calibration, install the chain code above the belt and fix both ends on the column. When the belt conveyor is started, the roller rotates in place on the belt to simulate the movement of raw materials with the belt. The roller is equipped with a bearing, which can rotate flexibly and has side covers at both ends, which are well sealed.