20-39 Series Tilt Switch (Material Blocking Switch)

The 20-39-25 tilt switch can be used alone or together with the control device. The standard control device has the enclosure protection class of NEMA4X. There are indicator lights on the front panel. The green light is normal, and the red light is alarm. In the control unit.

Product name20-39 series

characteristicEasy to install

Centigrade(20-39C series)

Standard housingType 20-43

Product quotation

0516-85050275

Call the service hotline to learn more

Product features

PRODUCT FEATURES

Degree of protection

The 20-39-25 tilt switch can be used alone or together with the control device. The standard control device has the enclosure protection class of NEMA4X.

safeguard

The working condition of the protection equipment is judged by the change of the opening and closing of the internal contact of the tilt switch.

Standard housing

Adjustable delay to prevent maloperation.

Easy to install

It is solid, corrosion resistant, easy to install, and the control device is a printed circuit board structure.

Product introduction

FOUR STRUCTURAL COMPONENTS

01
Product Overview
20-39 Series Tilt Switch (Material Blocking Switch)

The 20-39-25 tilt switch can be used alone or together with the control device. The standard control device has the enclosure protection class of NEMA4X. There are indicator lights on the front panel. The green light is normal, and the red light is alarm.
02
Product Overview
20-39 Series Tilt Switch (Material Blocking Switch)

Two normally open and normally closed output contacts are used to connect external alarms or controls. Interruption of line power will cause relay action. When the vertically suspended tilt switch is subjected to an external force and deviates from the vertical position by more than 15 degrees, the mercury contact inside the switch acts and the normally closed contact opens.