As a necessary large equipment in many industries, the belt coal feeder cannot avoid failure. It is impossible to find the manufacturer to repair every failure. Therefore, it is necessary to learn about the common failures and maintenance of the belt coal feeder. Now let's learn about the failures and maintenance of the belt coal feeder:
1. When the feeder is used, enough coal shall be stored in the coal bunker to avoid direct impact on the bottom plate when loading coal into the bunker.
2. After continuous operation every month, check whether the machine parts are loose or abnormal.
3. The transmission parts shall be checked every six consecutive months. The parts of the pull rod shall keep normal cooperation. If there is any abnormal phenomenon, repair or replace it immediately.
4. All rotating parts are required to be oiled once a month and inspected once a quarter to observe the damage of bearings and seals and replace them in time if problems are found.
5. Maintenance of main components:
(1) Reducer
Check once every six months, and clean the rolling bearing and box or replace the lubricating oil.
(2) Motor
It shall be carried out according to the repair and maintenance requirements specified for the motor.
